Additional information
| Brand | Dayton |
|---|---|
| MPN | 4WXV9 |
| Model | Pressure Plunger Pump |
| Connecting Rod Material | Aluminum |
| Crankcase Material | Die Cast Aluminum |
| Crankshaft Material | Hardened Steel |
| Discharge Connection Size | 3/8 in |
| Discharge Connection Type | BSP |
| Drive Type | Direct-Mount |
| Max. Flow Rate | 2.5 gpm |
| Intake Connection Size | 1/2 in |
| Intake Connection Type | BSP |
| Lubrication | Oil Bath |
| Max. Fluid Temperature | 140 °F |
| Max. Motor Speed | 3,400 RPM |
| Manifold Material | Forged Brass |
| Number of Pistons | 3 |
| Overall Height | 4.9 in |
| Overall Length | 7.2 in |
| Overall Width | 7.5 in |
| Pump Head Material | Forged Brass |
| Seal Material | Buna-N |
| Seal Type | Chevron; Cotton Duct; Lip |
| Shaft Outer Diameter | 3/4 in |
| Shaft Type | Hollow |
| Wetted Material | Brass |
| Plunger Material | Ceramic |
| Required Gasoline Engine Horsepower | 5 hp |
| Suction Port | 1/2 in BSP |
| Discharge Port | 3/8 in BSP |
| Bearing Type | Ball; Needle Roller |
| Flange Type | Horizontal Gas Engine |
| Operating Pressure (Maximum) | 2,500 psi |
| Piston Design | Triplex |
| Series Family | RCV |
| Max. Discharge Pressure | 2,700 psi |
| Shaft | 3/4 in Hollow |
